A
-
Abbasi sooraki, F.
Study of Rheological Properties of Rubber/Carbon Black Compounds
During Incorporation Stage in Internal Mixers [Volume 18, Issue 3, 2005, Pages 159-169]
-
Abdoos, M.
Incorporating Functional Groups on the Structure of Acrylic Fibers for Adsorption of Metal Ionic Compounds [Volume 18, Issue 4, 2005, Pages 235-240]
-
Abedian, A.
Evaluation and Development of Bridging Micromechanics Model Using
Mechanical Properties of Composite Materials Characterization Tests [Volume 18, Issue 6, 2006, Pages 369-376]
-
Adib Nazari, S.
Evaluation and Development of Bridging Micromechanics Model Using
Mechanical Properties of Composite Materials Characterization Tests [Volume 18, Issue 6, 2006, Pages 369-376]
-
Alavi, S.M.B.
Effect of Ethylene Vinyl Acetate on Mechanical Properties of Glass Mat Reinforced Polypropylene Composites [Volume 18, Issue 5, 2006, Pages 303-310]
-
Anaraki, M.Saeedi
Gel Spinning of UHMWPE: Effect of Processing Parameters and Raw Materials on Fiber Structure [Volume 18, Issue 2, 2005]
-
Arabi, H.
Effect of Ethylene Vinyl Acetate on Mechanical Properties of Glass Mat Reinforced Polypropylene Composites [Volume 18, Issue 5, 2006, Pages 303-310]
-
Asadi nejad, A.
Morphology and Linear Viscoelastic Properties of HDPE/EVA and LDPE/EVA Blends in the Melt State [Volume 18, Issue 5, 2006, Pages 319-324]
-
Asadinejad, Ahmad
Study on the Dynamic Melt Rheology of Low and High-density Polyethylene/Ethylene-vinyl Acetate Copolymer Blends [Volume 18, Issue 4, 2005, Pages 229-234]
B
-
Bakhshandeh, Gh.R.
Study of Rheological Properties of Rubber/Carbon Black Compounds
During Incorporation Stage in Internal Mixers [Volume 18, Issue 3, 2005, Pages 159-169]
-
Barikani, M.
Investigation of Mixing, Morphology and Mechanical Properties of Polyethylene/Starch/Polycaprolactone Compounds [Volume 18, Issue 3, 2005, Pages 181-190]
-
Beheshty, M.H.
The Effect of Co-cure and Counter Cure Methods on the Properties of
Phenolic Sandwich Structures [Volume 18, Issue 3, 2005, Pages 151-157]
E
-
Ebrahimi, Gh.
Improvement in Mechanical Properties of Cellulose Fibers-Thermoplastic
Polymer Composites [Volume 18, Issue 3, 2005, Pages 143-150]
-
Eisazadeh, H.
Investigating the Characteristics of Polyaniline and its Composite Films Prepared by Chemical Method [Volume 18, Issue 4, 2005, Pages 203-209]
-
Entezami, A.A.
Comparison of the Electrical Conductivity of Textile Fibers Coated with
Polyaniline and Polypyrrole [Volume 18, Issue 5, 2006, Pages 291-301]
-
Esmaeel poor, B.
The Effect of Aqueous/Organic Phase Ratio and Type of Initiator on Emulsion Polymerization of Vinyl Acetate-ethylene Copolymer [Volume 18, Issue 4, 2005, Pages 249-256]
F
-
Faghihi, J.
Effect of Ethylene Vinyl Acetate on Mechanical Properties of Glass Mat Reinforced Polypropylene Composites [Volume 18, Issue 5, 2006, Pages 303-310]
-
Famili, M.H.Navid
Manufacture of Magneto-rheological Actuator Based on Silicon Rubber [Volume 18, Issue 1, 2005]
-
Famili, M.H.Navid
Crystallinity Effect on Migration of Low MolecularWeight Substances from HDPE into Fatty Food [Volume 18, Issue 2, 2005]
-
Farahani, T.Darestani
Effect of Formulation on Mechanical Properties and Oil Resistance of NBR Compounds [Volume 18, Issue 1, 2005]
G
-
Ghasemi, L.
Effect of Drying Temperature of Polyester Chips on the Properties of Textured Yarn [Volume 18, Issue 3, 2005, Pages 171-180]
-
Ghoryshi, M.H.R.
Study of Rheological Properties of Rubber/Carbon Black Compounds
During Incorporation Stage in Internal Mixers [Volume 18, Issue 3, 2005, Pages 159-169]
H
-
Haghighat kish, M.
Comparison of the Electrical Conductivity of Textile Fibers Coated with
Polyaniline and Polypyrrole [Volume 18, Issue 5, 2006, Pages 291-301]
-
Hakim, Sh.
Slurry Polymerization of Ethylene in the Presence of Fatty Amine Anti-fouling by Ziegler-Natta Catalyst through a 23 Full Factorial Experimental Design [Volume 18, Issue 4, 2005, Pages 219-227]
-
Hashemi Najafabadi, S.
Evaluation of the Surface Treatment of Red Blood Cells by Polymer Coating [Volume 18, Issue 5, 2006, Pages 311-317]
-
Hosseini, S.A.
Electrospinning of Uniaxially Aligned and Molecularly Oriented Polyacrylonitrile Nanofibers with Divided Collectors [Volume 18, Issue 4, 2005, Pages 241-248]
-
Hosseini, S.K.
Improvement in Mechanical Properties of Cellulose Fibers-Thermoplastic
Polymer Composites [Volume 18, Issue 3, 2005, Pages 143-150]
J
-
Jafari, S.H.
Morphology and Linear Viscoelastic Properties of HDPE/EVA and LDPE/EVA Blends in the Melt State [Volume 18, Issue 5, 2006, Pages 319-324]
-
Jafari, S.H.
Study on the Dynamic Melt Rheology of Low and High-density Polyethylene/Ethylene-vinyl Acetate Copolymer Blends [Volume 18, Issue 4, 2005, Pages 229-234]
-
Jalili, R.
Electrospinning of Uniaxially Aligned and Molecularly Oriented Polyacrylonitrile Nanofibers with Divided Collectors [Volume 18, Issue 4, 2005, Pages 241-248]
K
-
Kamakani, Z.
Optimization of Cost-properties in Production of a General Purpose Conveyer Belt Using Taguchi Method with Overall Evaluation Criteria Method [Volume 18, Issue 3, 2005, Pages 135-142]
-
Karbasi, S.
Effect of Physical Environment on Chondrocytes Seeded onto a Biodegradable Polyurethane Scaffold for Articular Cartilage Tissue Engineering [Volume 18, Issue 6, 2006, Pages 383-390]
-
Kazemi Najafi, S.
Use of Central Composite Design in Cellulosic Industrial Research: Dimethyl Formamide Pulping of Bagasse [Volume 18, Issue 6, 2006, Pages 345-358]
-
Khonakdar, H.A.
Study on the Dynamic Melt Rheology of Low and High-density Polyethylene/Ethylene-vinyl Acetate Copolymer Blends [Volume 18, Issue 4, 2005, Pages 229-234]
L
-
Langroodi, A.Ershad
Synthesis and Characterization of Hybrid Organic-inorganic Nanocomposite Coatings Based on Tetramethoxysilane and Epoxy Resin by Sol-gel Method [Volume 18, Issue 1, 2005]
M
-
Mahdavian, M.
Modelling of Multicomponent Gases Permeation Process through Glassy
Polymer Membranes by the Maxwell-Stefan Formulation [Volume 18, Issue 6, 2006, Pages 359-368]
-
Manesh, K.Sobhan
Assessments on the Tear Resistance Improvement Mechanisms in the Carbon Black/Silica/Silane Reinforcement Systems [Volume 18, Issue 2, 2005]
-
Mirzadeh, H.
Effect of Physical Environment on Chondrocytes Seeded onto a Biodegradable Polyurethane Scaffold for Articular Cartilage Tissue Engineering [Volume 18, Issue 6, 2006, Pages 383-390]
-
Mohammad Beigi, kh.
Comparison of Different Biopolymers Performance in Water Treatment [Volume 18, Issue 5, 2006, Pages 285-290]
-
Mohammadi, M.
Investigation of Mixing, Morphology and Mechanical Properties of Polyethylene/Starch/Polycaprolactone Compounds [Volume 18, Issue 3, 2005, Pages 181-190]
-
Mohammadi, N.
Wear of Unsaturated Polyester Resin Containing Titanium Dioxide Particles: The Role of Interfacial Interaction and Particles Dispersion [Volume 18, Issue 4, 2005, Pages 211-217]
-
Mohammadi Roshandeh, J.
Use of Central Composite Design in Cellulosic Industrial Research: Dimethyl Formamide Pulping of Bagasse [Volume 18, Issue 6, 2006, Pages 345-358]
-
Moosavi, S.A.
Slurry Polymerization of Ethylene in the Presence of Fatty Amine Anti-fouling by Ziegler-Natta Catalyst through a 23 Full Factorial Experimental Design [Volume 18, Issue 4, 2005, Pages 219-227]
-
Moosavi shoshtari, A.
Incorporating Functional Groups on the Structure of Acrylic Fibers for Adsorption of Metal Ionic Compounds [Volume 18, Issue 4, 2005, Pages 235-240]
-
Morshed, M.
Effect of Drying Temperature of Polyester Chips on the Properties of Textured Yarn [Volume 18, Issue 3, 2005, Pages 171-180]
-
Morshed, M.
Electrospinning of Uniaxially Aligned and Molecularly Oriented Polyacrylonitrile Nanofibers with Divided Collectors [Volume 18, Issue 4, 2005, Pages 241-248]
-
Motahari, S.
Residual Stresses in Polymer Composites with Continuous Fibers [Volume 18, Issue 5, 2006, Pages 325-330]
-
Mottaghi, A.
Wear of Unsaturated Polyester Resin Containing Titanium Dioxide Particles: The Role of Interfacial Interaction and Particles Dispersion [Volume 18, Issue 4, 2005, Pages 211-217]
N
-
Navaee ardeh, Sh.
Use of Central Composite Design in Cellulosic Industrial Research: Dimethyl Formamide Pulping of Bagasse [Volume 18, Issue 6, 2006, Pages 345-358]
-
Nazaran, P.
Wear of Unsaturated Polyester Resin Containing Titanium Dioxide Particles: The Role of Interfacial Interaction and Particles Dispersion [Volume 18, Issue 4, 2005, Pages 211-217]
-
Nekoomanesh, M.
Slurry Polymerization of Ethylene in the Presence of Fatty Amine Anti-fouling by Ziegler-Natta Catalyst through a 23 Full Factorial Experimental Design [Volume 18, Issue 4, 2005, Pages 219-227]
-
Noori, M.
Comparison of the Electrical Conductivity of Textile Fibers Coated with
Polyaniline and Polypyrrole [Volume 18, Issue 5, 2006, Pages 291-301]
O
-
Orang, F.
Effect of Physical Environment on Chondrocytes Seeded onto a Biodegradable Polyurethane Scaffold for Articular Cartilage Tissue Engineering [Volume 18, Issue 6, 2006, Pages 383-390]
P
-
Poorjozi, P.
Use of Central Composite Design in Cellulosic Industrial Research: Dimethyl Formamide Pulping of Bagasse [Volume 18, Issue 6, 2006, Pages 345-358]
R
-
Rahimi, H.
Effect of Ethylene Vinyl Acetate on Mechanical Properties of Glass Mat Reinforced Polypropylene Composites [Volume 18, Issue 5, 2006, Pages 303-310]
-
Ramazani, A.
Optimization of Cost-properties in Production of a General Purpose Conveyer Belt Using Taguchi Method with Overall Evaluation Criteria Method [Volume 18, Issue 3, 2005, Pages 135-142]
-
Rasaee, M.J.
Evaluation of the Surface Treatment of Red Blood Cells by Polymer Coating [Volume 18, Issue 5, 2006, Pages 311-317]
-
Ravati, S.
Study of Rheological Properties of Rubber/Carbon Black Compounds
During Incorporation Stage in Internal Mixers [Volume 18, Issue 3, 2005, Pages 159-169]
-
Resalati, H.
Use of Central Composite Design in Cellulosic Industrial Research: Dimethyl Formamide Pulping of Bagasse [Volume 18, Issue 6, 2006, Pages 345-358]
-
Rezaee cherani, P.
Use of Central Composite Design in Cellulosic Industrial Research: Dimethyl Formamide Pulping of Bagasse [Volume 18, Issue 6, 2006, Pages 345-358]
-
Rostami Daroonkola, M.R.
The Effect of Aqueous/Organic Phase Ratio and Type of Initiator on Emulsion Polymerization of Vinyl Acetate-ethylene Copolymer [Volume 18, Issue 4, 2005, Pages 249-256]
S
-
Salehi Mobarakeh, H.
The Effect of Aqueous/Organic Phase Ratio and Type of Initiator on Emulsion Polymerization of Vinyl Acetate-ethylene Copolymer [Volume 18, Issue 4, 2005, Pages 249-256]
-
Shojaosadati, S.A.
Evaluation of the Surface Treatment of Red Blood Cells by Polymer Coating [Volume 18, Issue 5, 2006, Pages 311-317]
T
-
Tabari, A.R.
Investigation of Mechanical Properties of Polyester-Rice Straw Composites [Volume 18, Issue 6, 2006, Pages 377-382]
-
Tabarsa, T.
Investigation of Mechanical Properties of Polyester-Rice Straw Composites [Volume 18, Issue 6, 2006, Pages 377-382]
-
Taheri, N.
Wear of Unsaturated Polyester Resin Containing Titanium Dioxide Particles: The Role of Interfacial Interaction and Particles Dispersion [Volume 18, Issue 4, 2005, Pages 211-217]
V
-
Vafaiyan, M.
The Effect of Co-cure and Counter Cure Methods on the Properties of
Phenolic Sandwich Structures [Volume 18, Issue 3, 2005, Pages 151-157]
-
Vashegani Farahani, E.
Comparison of Different Biopolymers Performance in Water Treatment [Volume 18, Issue 5, 2006, Pages 285-290]
-
Vasheghani Farahani, E.
Evaluation of the Surface Treatment of Red Blood Cells by Polymer Coating [Volume 18, Issue 5, 2006, Pages 311-317]
Y
-
Yavari, A.
Morphology and Linear Viscoelastic Properties of HDPE/EVA and LDPE/EVA Blends in the Melt State [Volume 18, Issue 5, 2006, Pages 319-324]
-
Yavari, A.
Study on the Dynamic Melt Rheology of Low and High-density Polyethylene/Ethylene-vinyl Acetate Copolymer Blends [Volume 18, Issue 4, 2005, Pages 229-234]
Z
-
Zabih poor, M.
Evaluation and Development of Bridging Micromechanics Model Using
Mechanical Properties of Composite Materials Characterization Tests [Volume 18, Issue 6, 2006, Pages 369-376]
-
Zahiri, A.R.
Investigating the Characteristics of Polyaniline and its Composite Films Prepared by Chemical Method [Volume 18, Issue 4, 2005, Pages 203-209]
-
Zargaran, M.
Incorporating Functional Groups on the Structure of Acrylic Fibers for Adsorption of Metal Ionic Compounds [Volume 18, Issue 4, 2005, Pages 235-240]
Your query does not match with any item